Make use of scissors, a screwdriver, a high-powered magnet, a knife, or a set of pliers to cut through the material. Place a magnet on a table and arrange the tag so that the bottom side of the magnet is facing down on the magnet. You should be able to hear it click. The pin should come out if you move it up and down a little bit.
What is the best way to remove a garment security tag?
- Remove a security tag off clothes by returning to the store where it was purchased with a receipt and asking for it to be removed by store workers, as instructed. The majority of the time, do-it-yourself tactics result in a ruined garment.
To remove them at home, use a strong magnet, such as a hard drive magnet, to pull them out. Lie the tag on top of the magnet, with the ink dome or cartridge facing down, and press the tag into the magnet to secure it. You should hear a click, which indicates that the tag has been disabled. To release the pins in the tag, wiggle them up and down from their positions.
How do you know if a security tag has ink in it?
If the tag is an ink tag, first identify whether it is white or red and round, and whether it states that it includes red, pink, or blue and yellow ink that may be combined. If you attempt to remove it incorrectly, the tag will “explode,” leaving a permanent mark on the thief — or you — as well as the object.
A magnetic tag detacher is essentially a magnet that is used to remove security tags from items. A tag detacher is required in order to successfully remove a shop security tag from garments. Using this gadget, you may remove security tags off garments and other items that have been labeled as protected.
Can you break a security tag with a hammer?
You should never try to pull one off or burst it open with a hammer since there’s a 50 percent possibility that it contains ink, even though it doesn’t indicate “ink” on the outside. Unless you have the proper instrument, removing them is the most hardest task to complete.